WordPress.com

If you followed my steering rack post (and you are building a 420) you will have already drilled the mounting 8mm hole in the chassis steering rack platform. mais 232 palavras

Before you follow these steps make sure you have access to all the tools. I have owned an Econoseal connector crimping tool for a number of years, because Econoseal connectors are main type of electrical connector used by Caterham. mais 324 palavras

I started by checking I have the correct Anti Roll Bar (ARB) bushes for the ARB that’s being installed. The colour of the spot on the ARB should match the bush colour. mais 622 palavras

I know this a fiddly part of the build, and it’s also an area where I think Caterham’s instructions from either manual are at best described as disappointing. mais 1.278 palavras

I want to start this post by saying I think that this is no longer an essential step during the build. It seems Caterham and their parts suppliers have made improvements to the uprights supplied. mais 770 palavras

This is the first time I have fitted uprights without the “special nuts” which need a special 3/4” thin-walled long-reach socket to fit. Its replacement is the “Top Hat” spacer and a standard 1/2” UNF 1/2 nut. mais 709 palavras